Fastening StoreWALL Shelves

StoreWALL will give you One Bracket Packet (with 2 StopSlip Pads and 2 Pine Tree fasteners) with each shelf bracket. This includes both the 254mm and the 381mm bracket.

StopSlip pads are anti-skid. Your shelf stays firmly in place and can be repositioned at any time.

1. The StopSlip pad is peel and stick.
2. Apply the adhesive side of the StopSlip disk to the bracket.
3. Place the shelf on brackets.

Use the Pine Tree fastener when the shelf is to remain permanently in place.

1. Place brackets in storeWALL.
2. Place the shelf on brackets.
3. Mark bracket hole positions on the underside of the shelf.
4. Remove the shelf and drill 1/4″ hole at the marked positions.
5. Replace the shelf on brackets and align the shelf and bracket holes.
6. Insert the Pine Tree fastener through the underside of the bracket into the underside of the shelf.