StoreWALL Tri-Ski Hook
The Tri-Ski Hook has three prongs — the "tri" in the name — arranged to create dedicated separation points for skis, ski poles, snowboards, and associated gear. A full set of skis hangs between the prongs with poles alongside them, helmets and gloves on the same hook, and jackets draped over the frame. Everything for a day on the mountain in one wall-mounted location, off the garage floor and off each other.
Anti-slip, anti-scratch protection on all contact surfaces keeps ski bases and board finishes scratch-free during off-season storage. 68kg capacity handles a full ski setup comfortably. CamLok™ pre-installed. Sold as a single hook.
Specifications
← Swipe for full table →
| Specification | Detail |
|---|---|
| SKU | HK-TRI-SKI |
| Dimensions | 254mm H × 317mm W × 177mm D |
| Prongs | Three — creates dedicated separation points for skis, poles and accessories |
| Contact surface | Anti-slip, anti-scratch protection on all prong surfaces |
| Weight capacity | 68kg — panels installed with InstallStrips |
| Mounting | CamLok™ pre-installed — locks directly into StoreWALL slatwall grooves |
| Panel compatibility | Standard Duty, Heavy Duty StoreWALL panels, and MKE Slatwall panels |
| Repositionable | Yes — quarter-turn CamLok releases and relocks tool-free |
| Sold as | Single hook |
What the Tri-Ski Hook stores
- Skis — one pair hangs between the prongs, bases protected by the anti-scratch surface
- Ski poles — hang alongside the skis on a separate prong or looped over the frame
- Snowboards — board rests across the prongs, base protected from contact scratches
- Helmets — hang from the hook frame between seasons
- Gloves and goggles — draped or looped over the prongs to dry after use
- Ski jackets and pants — draped over the frame to dry and store between trips
- Wakeboard and kiteboard — flat boards rest across the three prongs
Why the anti-scratch surface matters
Ski bases and snowboard bases are performance surfaces — scratches affect glide and require repair. The Tri-Ski Hook's anti-slip, anti-scratch coating on every contact point means your skis and boards can rest directly on the hook without a cloth or foam layer underneath. The coating also grips the gear in place — skis don't slide along the prong and fall when bumped.
Drying ski gear after the mountain
The StoreWALL panel system is fully waterproof — PVC panels don't absorb moisture. Hanging wet ski gear directly on the Tri-Ski Hook after a day on the mountain lets everything dry in place without wet gear piled on the floor or draped over chairs. Boots can be placed on a nearby shelf; jacket and pants draped over the hook frame; gloves on the prongs. The whole setup dries overnight and is ready for the next trip.
Frequently asked questions
Will it hold a full set of skis and poles together?
Yes — the three prongs create enough separation to hang a pair of skis with poles alongside them on the same hook. The 317mm width and 68kg capacity handle a full adult ski setup including poles.
Can I use it for a snowboard?
Yes — a snowboard rests across the prongs horizontally, base down. The anti-scratch coating protects the base finish. The 317mm width suits most standard snowboard widths.
How should I mount it for skis?
Mount the hook high enough that the ski tips clear the floor — for most adult skis this is around 1.8–2.0m from the floor to the hook. The skis hang tip-down with the tails resting on the prongs, which is the recommended off-season storage orientation as it takes pressure off the binding mounting points.
Is it compatible with all StoreWALL panels?
Compatible with Standard Duty, Heavy Duty StoreWALL panels, and MKE Slatwall panels. The CamLok fits the same 76mm on-centre groove pitch across all three.
