Garage Slatwall Panels — 2438mm Standard Duty, Brite White

Four Full-Length Panels Per Carton — Fewer Joins, More Wall

The 2438mm panel is the format to choose when you have an uninterrupted wall run. At 2.4 metres long, each panel spans the full height of a standard garage wall in a single piece — no mid-wall joins, no alignment issues, and a much cleaner finished look than shorter panels joined end-to-end.

One carton contains four panels and covers 2.96sqm of wall. For most single or double garage walls, you'll need two to four cartons to cover a full wall. Use the Panel Calculator to get an exact count based on your dimensions.

About Brite White

Brite White is our most popular colour — a clean, bright white that makes accessories and stored items easy to see at a glance. It works in garages, workshops, and utility rooms, and pairs well with both chrome and coloured accessories.

Note on colour consistency: White panel tone may vary slightly between production batches. If you are purchasing additional panels at a later date to extend an existing installation, there may be a subtle variation in shade between runs.

Panel Specifications

InstallStrips — Add Them at Checkout

InstallStrips are sold separately for the 2438mm panels — you can add them directly from the product options above. For each 2.4m panel, you need two InstallStrips (one every stud or ~450mm along the panel length), so a carton of four panels requires eight InstallStrips total.

Why InstallStrips matter:

• Weight capacity: InstallStrip installation gives approximately 4× higher accessory weight ratings compared to face-screwing through the panel
• Clean finish: no visible screw heads on the panel face
• Repositionability: panels installed on InstallStrips can be removed and rehung without leaving visible holes
• Load distribution: weight is spread across multiple stud contact points along each strip, not concentrated at individual screws

Installing without InstallStrips reduces all hook, shelf, and bracket weight capacities by approximately 75%. For bikes, ladders, or anything with real weight, InstallStrips are not optional in practice.

How Much Wall Will This Cover?

One carton (four 2438mm panels) covers 2.96sqm — approximately 2.4m wide × 1.2m high. That's a single row of four panels running the full height of a standard garage wall, or two rows at half height.

As a rough guide for full wall coverage:

• Single garage side wall (approx. 3.6m wide × 2.4m high): approx. 3–4 cartons
• Double garage back wall (approx. 5.4m wide × 2.4m high): approx. 5–6 cartons
• Use the Panel Calculator for an exact count based on your wall dimensions

Frequently Asked Questions

Do InstallStrips come with the panels? No — for the 2438mm individual colour cartons, InstallStrips are an optional add-on at checkout. You'll need two per panel (eight for a full carton of four). If you'd prefer everything in one order with InstallStrips and fasteners included, see the 2438mm Get Started Kit.

Why 2438mm instead of 1219mm? The 2.4m panel is the right choice for uninterrupted walls — full-height coverage in one panel with no mid-wall horizontal joins. The 1219mm panel is better suited to walls with windows, doors, power points, or any obstruction that requires the panels to be cut around. Both sizes are the same Standard Duty PVC material and are compatible with identical accessories.

What screws or fasteners do I need? InstallStrips are fixed to wall studs or masonry using either 7g × 40mm screws (timber stud walls) or 5mm × 40mm nail anchors (masonry/brick walls). Both are available as add-ons at checkout.

Can I mix 2438mm and 1219mm panels on the same wall? Yes — the panels share the same groove profile and pitch, so they are fully compatible with each other and with all StoreWALL accessories.

How are 2.4m cartons shipped? The 2.4m carton is 2464mm long and ships via courier freight, not Australia Post. Delivery times and carriers may differ from smaller items — refer to our Delivery Policy for details.

Other Colours Available

Standard Duty 2438mm panels are also available in:

• Weathered Grey — warm mid-grey, colour matched to StoreWALL accessories
• Barnwood Grey — weathered grey woodgrain finish
• Whitewood — light natural timber look
• Rustic Cedar — warm reddish-brown timber-look finish
• Graphite Steel — unique metallic surface treatment; handle with care during installation
• Black — deep black, strong contrast with chrome or stainless accessories

Notes:

Brite White - The Whiteness of the Brite White panel may vary between batches and orders.

Graphite Steel - is a unique metallic surface treatment, very similar to that found on an automobile. The substructure is solid PVC as are all storeWALL slatwall panels. Please note the metallic effect is only on the surface and if gouged deep enough, just like an automobile, the gouge may show. Thus we encourage reasonable care and handling be exercised when choosing our Graphite Steel slatwall panels.

Weathered Grey - Our Weathered Grey finishes are made as solid colour slatwall but do have a painted finish on the surface. This is to eliminate common streaking in the extrusion process that is only found in grey extruded plastic. The painted finish results in a even consistent finish.

Rustic Cedar, Global Pine, and Barnwood Grey - are intended to simulate real wood; and like real wood there might be some variation in grain and tint from panel to panel.