StoreWALL 1219mm Floating Plastic Shelf
A reversible plastic shelf that mounts to StoreWALL panels via 254mm Brackets (sold separately). One side is flat with no lip — use it as a standard shelf. Flip it over and it becomes a tray with a raised lip edge all the way around, useful for items that might roll or shift.
The 1219mm shelf is the longer of the two floating shelf options — suited to wider storage runs where you need more horizontal surface. For shorter runs, the 812mm shelf is available. Sold as a single shelf. Brackets not included.
Specifications
← Swipe for full table →
| Specification | Detail |
|---|---|
| SKU | SH-10-48 |
| Shelf dimensions | 1219mm L × 254mm D |
| Material | Moulded plastic |
| Reversible | Yes — flat shelf one side, lipped tray on the other |
| Weight capacity | 45kg maximum — evenly distributed across the shelf surface |
| Brackets required | Minimum 2 × 254mm Brackets — position 152mm in from each end. Sold separately. |
| Panel compatibility | Standard Duty, Heavy Duty StoreWALL panels, and MKE Slatwall panels |
| Locking mechanism | CamLok™ all-metal mechanism on brackets — locks accessories firmly to the panel |
| Construction note | Shelf ends are custom cut and glued. If an end comes loose it can be re-glued. |
How many brackets do you need?
The shelf rests on 254mm Brackets which clip into your StoreWALL panels. For the 1219mm shelf, the minimum is 2 brackets — positioned 152mm in from each end. The general guide for longer shelf runs:
- Up to 1.2m — minimum 2 brackets
- Up to 1.8m — minimum 3 brackets
- Up to 2.4m — minimum 4 brackets
For heavy loads, adding a third bracket in the centre of the 1219mm shelf provides additional support and reduces flex under weight.
Flat shelf or lipped tray — when to use each side
The flat side suits general garage storage — paint tins, toolboxes, boxes, power tool cases, anything with a stable base. The lipped tray side is useful for smaller loose items that might shift or roll — spray cans, jars, bottles, small hardware — where the raised edge provides containment without a closed bin.
Frequently asked questions
Are the brackets included?
No. The shelf is sold separately from the brackets. You'll need a minimum of 2 × 254mm Brackets for the 1219mm shelf.
What's the maximum weight this shelf holds?
45kg, evenly distributed across the shelf surface. Do not concentrate load at one point — spread weight evenly and position brackets 152mm from each end.
Can this shelf be used on all StoreWALL panel types?
Yes — compatible with Basic Duty, Standard Duty, and Heavy Duty panels. The brackets clip into the standard 76mm on-centre grooves common to all three panel types.
Is a shorter shelf available?
Yes — the 812mm Floating Plastic Shelf is available for shorter runs. It uses the same 254mm Brackets and the same reversible flat/tray design.