Important — please read before ordering: This carton contains panels of two different widths — 2 × 1219mm and 2 × 1100mm (4 panels total). All four panels have minor surface marks from handling. The marks are cosmetic only and do not affect structural performance or CamLok compatibility. At $189.99 — 33% off the standard carton price — this is the right choice for utility areas, sheds, laundries, or any installation where the surface finish is less critical.

Clearance stock — 1 carton remaining.

What's in the Carton

• 2 × Standard Duty Brite White panels — 1219mm W × 304mm H
• 2 × Standard Duty Brite White panels — 1100mm W × 304mm H
• Total: 4 panels with minor surface marks
• Total wall coverage: approximately 1.42m²

Installation

Installs using Standard Duty InstallStrips — the same method as full-size SD cartons. Add InstallStrips and fasteners at checkout:

• 1219mm panels — 1 InstallStrip each
• 1100mm panels — 1 InstallStrip each (914mm strip covers the full panel width)
• Total: 4 InstallStrips for the full carton

Each 914mm InstallStrip can be broken into three equal sections — 305mm, 609mm, or used at full 914mm length. Screw to wall studs through plasterboard, then hook panels onto the InstallStrip claws. Alternatively, face-screw panels directly using colour-matched screws (approximately 20 screws per 1219mm panel) — note face screws reduce load capacity by approximately 75%.

Compatible Accessories

All Standard Duty and Heavy Duty StoreWALL CamLok accessories — hooks, shelves, brackets, baskets and bins — are fully compatible. The mixed widths (1219mm and 1100mm) don't affect CamLok compatibility; all panels use the same 76mm on-centre groove pitch.