The right screws make all the difference when installing StoreWALL InstallStrips. These 7g × 40mm self-drilling bugle head screws are the recommended fastener for fixing StoreWALL Standard Duty and Heavy Duty InstallStrips to timber stud walls — countersinking cleanly into the stud without pre-drilling, and holding the InstallStrip firmly in position for the panel to hook onto.
One pack of 100 covers approximately 8 InstallStrips (12 screws per strip, 3 studs per strip × 4 screws per stud). For a standard carton of 4 panels with 4 InstallStrips, one pack is sufficient with screws to spare.
Note: These screws are for timber stud walls only. For brick, concrete or masonry walls, use 5mm × 40mm nylon mushroom anchors instead.
Specifications
| Specification | Detail |
|---|---|
| Size | 7g × 40mm |
| Head type | Bugle head — countersinks into timber without pre-drilling |
| Point type | Self-drilling needle point |
| Finish | Zinc plated — for internal use |
| Pack quantity | 100 screws |
| Recommended use | Fixing StoreWALL InstallStrips to timber stud walls |
| Coverage | Approx. 8 InstallStrips per pack (12 screws per InstallStrip) |
| Wall type | Timber studs only — use nylon anchors for brick or concrete |
Installing on brick or concrete? Use 5mm × 40mm Mushroom Nail-In Anchors instead. Need InstallStrips? Order Standard Duty InstallStrips or Heavy Duty InstallStrips separately.
