The StoreWALL 1219mm Division Trim (Grey) is the half-length version of the full 2438mm grey Division Trim — designed for installations using 1219mm Standard Duty or Heavy Duty panels, or wherever a shorter seam cover is needed. It snaps directly into the slatwall groove with no adhesive, no Velcro, and no tools required. At AU$21.99 and within standard courier size limits, there are no shipping restrictions.

Important — Read Before Ordering

• Not compatible with InstallStrip at panel ends. If your panels have an InstallStrip running at the vertical edge where panels meet, the InstallStrip will prevent the Division Trim from sitting correctly in the groove. In this scenario, use the Wide Trim (Weathered Grey) 1219mm instead — it sits over the panel face rather than snapping into the groove.
• Colour note — very slight variation from Weathered Grey panels. The Division Trim Grey has a very slight colour difference from StoreWALL Weathered Grey wall panels (both Standard and Heavy Duty). For most installations this is not noticeable, but where close colour matching is critical, the Wide Trim in Weathered Grey is a safer choice.

Specifications

Division Trim Range

• 1219mm Division Trim (Grey) — half-length; no shipping restrictions (this product)
• 2438mm Division Trim (Grey) — full-length; shipping cut-in-half if ordered without 2438mm panels
• 1219mm Division Trim (White) — half-length white version
• 2438mm Division Trim (White) — full-length white version