StoreWALL Ultra Duty 381mm Hook

The compact version of the Ultra Duty surf and paddle board bracket range — 381mm deep versus the 635mm of the full-size bracket. Designed for smaller surfboards, shortboards, and paddleboards, or for garages where wall space is tight and the extra depth of the 635mm bracket isn't needed. The board slides in and out without awkward lifting or tilting — no need to angle the board to clear the wall.

The protective coating prevents scratches to board surfaces. The 152mm backplate engages four panel grooves for maximum load distribution. Most customers buy in pairs — one bracket per end of the board. CamLok™ pre-installed. Sold as a single bracket.

Specifications

← Swipe for full table →

What the 381mm Bracket is best for

• Shortboards and fish surfboards — narrower, lighter boards that don't need the full 635mm depth to hang securely
• Kids' and junior surfboards — smaller boards suit the more compact bracket profile
• Smaller paddleboards and SUPs — compact SUPs where the full-size bracket would project too far from the wall
• Tight garage spaces — where every millimetre of wall-to-floor clearance matters and the 635mm bracket would project too far into the room
• Large gardening tools and sports equipment — the 381mm depth also suits oversized items that need more reach than a standard hook but less than the full-size board bracket

381mm vs 635mm — choosing between them

• 381mm (this product) — 381mm deep, 80kg. For smaller boards, compact SUPs, and tighter spaces. $96.99.
• 635mm Surf & Paddle Board Bracket — 635mm deep, 80kg. For full-size surfboards and large SUPs where the extra depth allows the board to hang completely flat without clearance issues. $110.99.

If you have a standard or large surfboard and ceiling height allows, the 635mm is the more versatile choice. If you have a smaller board or limited wall-to-ceiling space, the 381mm is the practical option.

Ultra Duty Hook Range

• Ultra Duty Utility Hook — 150mm wide, 381mm deep, 80kg. For kayaks, tyres, and deep-reach storage.
• Ultra Duty Wide Hook — 330mm wide, 250mm deep, 80kg. For car bike racks, tyres, and broad items.
• Ultra Duty 381mm Hook (this product) — 152mm wide, 381mm deep, 80kg. For smaller boards and compact board storage.
• Ultra Duty 635mm Surf & Paddle Board Bracket — 152mm wide, 635mm deep, 80kg. For full-size surfboards and large SUPs.

Frequently asked questions

Do I need one bracket or two?
Two — one near each end of the board, spaced at roughly one-third and two-thirds of the board's length for even weight distribution.

Will it scratch my board?
The bracket has a protective coating that prevents scratching. For extra protection on glass or epoxy boards, add a foam sleeve or pool noodle section over each bracket arm before resting the board on it.

What's the difference between this and the 635mm bracket?
The 381mm bracket is shorter — suited to smaller boards and tighter spaces. The 635mm bracket gives full-size surfboards and large SUPs enough depth to hang completely flat without clearance issues. If your board is a standard or long board, the 635mm is the better choice.

Is it compatible with all StoreWALL panels?
Compatible with Standard Duty, Heavy Duty StoreWALL panels, and MKE Slatwall panels. The CamLok fits the same 76mm on-centre groove pitch across all three.