StoreWALL 762mm Metal Shelf

A heavy-duty industrial steel shelf unit that locks directly into StoreWALL panels using CamLok™ backplates — no separate brackets required. At 393mm deep and 254mm high with a 90kg weight capacity, this is the strongest and deepest shelf in the StoreWALL range. Built for serious storage: heavy toolboxes, power tools, compressors, jerry cans, and bulky equipment that nothing else in the range handles as well.

Only 3 in stock. Sold as a single unit.

Specifications

← Swipe for full table →

Why this shelf — and what makes it different

This is the only shelf in the StoreWALL range that combines CamLok locking, bracket-free mounting, a 393mm depth, and a 90kg capacity in one unit. Every other shelf in the range either requires separate brackets, has a shallower depth, or has a lower weight rating. The 762mm metal shelf is in a category of its own for heavy storage applications.

The CamLok backplates mean it locks securely into the panel grooves the same way hooks and other accessories do — turn the CamLok and it's fixed in place. Unlike the ledge shelf, it won't dislodge accidentally and is appropriate for heavier overhead storage where security matters.

The internal reinforcement bar is what enables the 90kg rating. Without it, a steel shelf of this width would flex noticeably under load — the reinforcement bar keeps the shelf rigid across its full 762mm span even with weight concentrated at the centre.

What this shelf is best used for

At 393mm deep and 254mm high, this shelf has real volume — it's not just a surface, it's a compartment. Best suited to:

• Heavy toolboxes or tool cases
• Large power tools — circular saws, routers, planers
• Jerry cans, oil containers, fluid storage
• Compressor accessories and air tools
• Batteries and heavy chargers
• Workshop consumables in bulk quantities

How this compares to other shelves in the range

The 812mm Metal Ledge Shelf ($39.99) is shallower (200mm), lighter capacity (18kg), and hooks in without CamLok locking. The 400mm Deep Floating Metal Shelf ($92.99) requires 381mm brackets, is 400mm deep, and holds 45kg. The 762mm Metal Shelf at $259.99 is the premium option — deeper than the ledge shelf, higher capacity than all others, and fully lockable without separate brackets.

Frequently asked questions

Do I need to buy brackets separately?
No. The CamLok backplates are included and the shelf mounts directly to your slatwall panels without any additional hardware.

What's the 90kg weight capacity based on?
90kg assumes your wall panels are installed with StoreWALL InstallStrips. Without InstallStrips, panel load capacity drops by approximately 75% — the shelf itself can handle 90kg but the panel installation must match. Use InstallStrips for the rated capacity.

Can I reposition this shelf once installed?
Yes. The CamLok mechanism unlocks to reposition anywhere on the wall. It's the same system used across all StoreWALL accessories — turn to lock, turn back to release and move.

Is it compatible with other slatwall brands?
Yes — any standard 76mm on-centre slatwall panel from any brand will accept this shelf's CamLok backplates.