The StoreWALL Division Trim (Grey) is a seam cover that snaps directly into the slatwall groove — no adhesive, no Velcro, no tools required. Where two panel runs meet vertically, the Division Trim clips neatly over the join, concealing the seam for a cleaner, more finished look. It's the quickest trim solution in the range to install and remove.

Important — Read Before Ordering

• Not compatible with InstallStrip at panel ends. If your panels have an InstallStrip running at the vertical edge where panels meet, the InstallStrip will prevent the Division Trim from sitting correctly in the groove. In this scenario, use the Wide Trim (Weathered Grey) instead — it sits over the panel face rather than snapping into the groove.
• Colour note — very slight variation from Weathered Grey panels. The Division Trim Grey has a very slight colour difference from StoreWALL Weathered Grey wall panels (both Standard and Heavy Duty). For most installations this is not noticeable, but where close colour matching is critical, the Wide Trim in Weathered Grey is a safer choice.

Specifications

Division Trim vs Wide Trim

• Division Trim (Grey) — snaps into the groove; for seams where no InstallStrip is at the panel end; quicker install (this product)
• Wide Trim (Weathered Grey) — sits over the panel face; works with or without InstallStrips; closer colour match to Weathered Grey panels

Also Available

• Division Trim (White) 2438mm — for white panel installations
• Division Trim (White) 1219mm — half-length for 1219mm panel installations