StoreWALL Heavy Duty Cradle Hook

The Heavy Duty Cradle Hook is the deeper, larger version of the standard Cradle Hook — 165mm deep versus 146mm — designed for bulkier cylindrical items that need more reach from the wall to hang comfortably. Where the standard Cradle Hook handles garden hoses, extension cords, and smaller coiled items, the HD version suits wider coiled items, heavier hoses, thicker rope, and larger equipment where the extra depth makes a practical difference.

80kg capacity. CamLok™ pre-installed. Sold as a single hook.

Specifications

← Swipe for full table →

What the Heavy Duty Cradle Hook is best for

• Heavy garden hoses — thick rubber hoses that need a deeper cradle to sit securely
• Thick rope and tow straps — coiled items with a larger diameter than standard cord
• Large extension leads — heavy-duty outdoor leads coiled and stored off the floor
• Pressure washer hoses — stiffer, thicker hose that benefits from the extra depth
• Larger gym equipment — resistance bands, jump ropes, and heavier coiled equipment
• Pool and garden tubing — wider diameter tubing that overhangs a standard cradle

HD Cradle Hook vs standard Cradle Hook — choosing between them

• Standard Cradle Hook — 146mm deep, 90kg rated. Suits garden hoses, extension cords, rope, and most coiled items.
• Heavy Duty Cradle Hook (this product) — 165mm deep, 80kg rated. Suits bulkier, wider, or stiffer coiled items that overhang or don't sit comfortably in the shallower cradle.

Note that the standard Cradle Hook has a slightly higher weight capacity (90kg vs 80kg) despite being smaller — the HD version's advantage is depth and cradle size, not weight rating.

Frequently Asked Questions

Why does the standard Cradle Hook have a higher weight rating than the HD version?
Hook weight ratings are influenced by multiple factors including CamLok geometry and lever arm distances — not just hook size. The standard Cradle Hook's geometry results in a 90kg rating; the HD Cradle Hook rates at 80kg. The HD version's advantage is its 165mm depth for bulkier items, not its weight capacity.

Is it compatible with all StoreWALL panels?
Compatible with Standard Duty, Heavy Duty StoreWALL panels, and MKE Slatwall panels. The CamLok fits the same 76mm on-centre groove pitch across all three.

What if I'm not sure which size I need?
If the item you're storing has a coil or loop diameter under about 250mm, the standard Cradle Hook is likely sufficient. If the coil is wider or the item is stiffer and harder to keep contained, the HD version gives you more room.